Transparent and colourless after drying, it will not destroy the original decorative effect, will not turn yellow, and will not stain dust. Strong adhesion and flexibility, can resist a certain degree of deformation and cracking. Breathable, suitable for humid climate. Designed to preserve the original beauty. IMPORTANT: WALL APPLICATION ONLY NOT SUITABLE FOR FLOORS — THIS PRODUCT IS NOT WEAR-RESISTANT AND IS NOT DESIGNED TO WITHSTAND FOOT TRAFFIC OR ABRASION. Ideal For: Decorative surfaces, textured finishes, stonework and other suitable surfaces where protection is required without losing the original visual effect. Coverage: Approximately 3–4 m² per kg, depending on surface condition, porosity, and application thickness. For 5KG product: 5KG covers approximately 15–20 m², depending on application conditions.
Is a high-permeability cement-based strengthening treatment formulated with polymer emulsion and multifunctional additives. It penetrates into porous and help improve surface hardness, strength and stability. It helps strengthen loose cement mortar, concrete, plaster and putty surfaces while reducing surface powdering, shedding and deterioration. SUITABLE FOR Concrete • Cement Mortar • Plaster • Putty Layers • Loose & Powdery Cement-Based Surfaces TECHNICAL INFORMATION Suitable Base: Cement-based surfaces Consumption: Approximately 0.10–0.25 kg/m² Expected Service Life: Approximately 10 years COVERAGE At the recommended consumption rate: * 5 kg: approximately 20–50 m²
Is an acrylic resin-based coating designed for renovating and refreshing suitable tiled and cement surfaces. The acrylic resin provides good adhesion, water resistance and chemical resistance, while high-quality pigments provide a rich and attractive range of colours. Technical Information Suitable Surfaces: Ceramic tiles, cement and other properly prepared compatible surfaces. Recommended Film Thickness: Approximately 1 mm. Consumption: Approximately 0.07–0.10 kg/m² per 1 mm film thickness. Coverage: Approximately 10–14.3 m² per 1 kg at 1 mm thickness. Expected Service Life: Approximately 10–15 years, depending on surface preparation, application and environmental conditions. Application: Tile and floor renovation. Coverage Guide * 5 kg: approximately 50–71.4 m² Important: Actual coverage can vary depending on surface condition, porosity, application method and coating thickness.
Is an acrylic resin-based coating designed for renovating and refreshing suitable tiled and cement surfaces. The acrylic resin provides good adhesion, water resistance and chemical resistance, while high-quality pigments provide a rich and attractive range of colours. Technical Information Suitable Surfaces: Ceramic tiles, cement and other properly prepared compatible surfaces. Recommended Film Thickness: Approximately 1 mm. Consumption: Approximately 0.07–0.10 kg/m² per 1 mm film thickness. Coverage: Approximately 10–14.3 m² per 1 kg at 1 mm thickness. Expected Service Life: Approximately 10–15 years, depending on surface preparation, application and environmental conditions. Application: Tile and floor renovation. Coverage Guide * 5 kg: approximately 50–71.4 m² Important: Actual coverage can vary depending on surface condition, porosity, application method and coating thickness.
Transparent and colourless after drying, it will not destroy the original decorative effect, will not turn yellow, and will not stain dust. Strong adhesion and flexibility, can resist a certain degree of deformation and cracking. Breathable, suitable for humid climate. Designed to preserve the original beauty. IMPORTANT: WALL APPLICATION ONLY NOT SUITABLE FOR FLOORS — THIS PRODUCT IS NOT WEAR-RESISTANT AND IS NOT DESIGNED TO WITHSTAND FOOT TRAFFIC OR ABRASION. Ideal For: Decorative surfaces, textured finishes, stonework and other suitable surfaces where protection is required without losing the original visual effect. Coverage: Approximately 3–4 m² per kg, depending on surface condition, porosity, and application thickness. For 5KG product: 5KG covers approximately 15–20 m², depending on application conditions.
Is a high-permeability cement-based strengthening treatment formulated with polymer emulsion and multifunctional additives. It penetrates into porous and help improve surface hardness, strength and stability. It helps strengthen loose cement mortar, concrete, plaster and putty surfaces while reducing surface powdering, shedding and deterioration. SUITABLE FOR Concrete • Cement Mortar • Plaster • Putty Layers • Loose & Powdery Cement-Based Surfaces TECHNICAL INFORMATION Suitable Base: Cement-based surfaces Consumption: Approximately 0.10–0.25 kg/m² Expected Service Life: Approximately 10 years COVERAGE At the recommended consumption rate: * 5 kg: approximately 20–50 m²
Login or create an account to place your order or buy directly by making payment online!
